$50.00
In stock
The FX3 XLR EX10DR bolts on to the Sony XLR handle and attaches to the FilmCube. It strengthens and lengthens the XLR handle. It takes only seconds to attach and remove, which allows you to use quick release plates.
Reinforced Design: Strengthen your Sony XLR handel to make sure your gear survives the grueling forces of filmmaking.
Universal Design: The handle extends allowing to use the handle close or far from the camera body. This helps you perfectly balance your camera, quick release, and Filmcube + XLR Handle.
Extended Grip: Gives more gripping area for provided support and comfort.
Quick Attach/Remove: Allows for quick and easy attaching/removing, so that you don’t slow down your workflow. Just unscrew the thumbscrews and remove the XLR handle as you normally would.
Required Additional Gear:
You need the FX3/FX30, XLR Handle and a FilmCube Universal.
The UNI_BOX_S1 is already making its mark in feature films.
Transform your setup into a professional-grade rig with Film Cube.
This system works with most mirrorless/dslr cameras as long as the camera has a side flipping screen and any camera cage on it.
If your screen height measures less than 58mm, it should fit with the FilmCube.
Yes. This works with the XLR top handle.
You need any camera cage. Works exceptionally well if the cage has a quick release system.
Yes! That’s one of our favorite features. You can go from a full cinema rig to a nimble gimbal setup in seconds.
So we tested it with a human man around 190lbs+ and didn’t break. After bouncing on it, it gave way and slid down the height tower and lost it’s position. So if you’re going to mount something on it, make sure it’s less than aprox 190lbs.
You can mount anything, even extra cheese plates. You can mount to the top, right and back side of the FilmCube.
An example rig could be:
On the back: a vmount plate and vmount battery.
On the side: a wireless monitoring system like a Teradek or Hollylands.
On the top: You can mount an external ssd, a monitor, a timecode box, wireless mics, or any other thing you use on set daily.
The FilmCube is handmade in the USA! Every product is quality tested before shipping and may slightly vary in appearance, because it’s not mass produced.
The EX10DR Handle Extender only works with the FilmCube and the Sony Fx3/30.
Join our community & get updates and discounts as soon as they’re available.
